Legend 260+
- “Take advantage of all of the features the Legend Basic system has to offer, plus these great features:”
- Add more certainty to your Section Control drill’s operation with the LEGEND ADVANCED. Be sure that active sections are seeding with active section detection. Options for Bourgault: Tank Pressure Sensors and Tank Delivery Sensors for multiple products in a single air stream.
- The Legend Advanced system can accommodate up to 240 sensors on 3 separate loops.
- Most drills using sectional technology can take advantage of LEGEND ADVANCED ‘hardware’ section sensing. This allows absolute certainty that a section of the drill is turned on or off. It requires the larger module and extra wire harness. It is available for Morris, John Deere, Seed Hawk, Seed Master and Bourgault drills. CNH and other drills can use the predictive section shutoff feature (included)
- Communicate with Cart Section Control(BG, Morris, Seedhawk, Seedmaster)
- Compatible with Tank Delivery(Primary) sensors
- Ability to monitor 3 separate product loops
- Compatible with tank pressure sensors
SEED WITH CONFIDENCE
LOOKING TO UPGRADE?
THE LEGEND 260+ ADDS UP!
- Add more sensor/monitoring functionality to your air cart/seeding system
- Add up to six air cart sensors (fan, shaft, bin, work, or speed)
- Add up to 240 Legend Seed Sensors
- Upgrade from our classic ART-260 Monitor and use the legend rate + blockage sensors
THE LEGEND 260+ AVAILABLE THROUGH SELECT DEALERS
UPGRADE YOUR SEEDING SYSYTEM WITH ALL-NEW ELECTRONICS AT A REASONABLE PRICE!
Replace your older or non functional seeding electronics and controls. A new monitor and wire
harness will restore the useful life of your seeding rig, while adding up-to-date- features.
Even clutch controlled ground drive systems can benefit from improved fuctionality and added
features like Legend Seed Flow Sensors.
- up to 6 air cart sensors (shaft, bin, work, fan, speed) can be connected using the economical Legend seed sensor harness
- If more than the 6 air cart sensors are required, a custom harness can be constructed to connect to the 35 pin connector on the back of the monitor
- The switches on the front panel control 4 outputs available in the 35 pin connector which can be used to control solenoids, clutches or PWM valves
LEGEND 260+ SPECIFICATIONS
- Number of independent seed sensor loops 2
- Max Number of seed sensors per loop 120
- Max Number of discrete sensors (Shaft/Speed/Bin/Fan/Meter) 16
- Max Number of PWM/Clutch outputs 4
- Area Counters 2
- LCD Display 2x16 Characters
- Audible Alarm 1 watt speaker
